Protecshine Polish and Protect Display-tall

Protecshine – Polish and Protect


Protecshine Polish and Protect creates a clear, non-stick surface so you can rinse away mud, road debris, salt, bugs, grime, dust, and protect against corrosion with a shine!  Reduce the need to use harsh soaps/detergents and scrubbing to remove buildup and debris; safely clean and effectively protect your vehicle, watercraft and power toys in less time for less money.

Directions for Use

  1. Shake lightly.
  2. Application: Make sure surface is clean of all soaps, detergents or other chemicals. Spray the surface evenly anywhere buildup occurs. Allow product to change from white to clear after application. For severe conditions and heavy buildup, a 2nd coat may be applied.
  3. Cleaning: Rinse all debris with water. Reapply Protecshine to the dry surface. If soaps, detergents or other chemicals are used to clean, rinse all away before reapplying Protecshine. Residues may cause Protechine to be ineffective.
  4. Polishing Application: Wash and rinse vehicle to remove road grime, built-up waxes or chemicals from past cleanings before applying. Mist one panel of the vehicle at a time with Protecshine and wipe with a micro-fiber cloth dampened with Protecshine while the droplets are still white. Turn the cloth frequently to remove dirt and avoid scratching the paint. Final polishing with a dry micro-fiber cloth may be needed to prevent streaking.
    Before applying, test a small amount in an inconspicuous place to check compatibility with surface.

Availability

40800  |  Protecshine Polish and Protect – Concentrate – 32oz. (0.95 ltr.) Bottle w/pump  |  $35.00

40806  |  Protecshine Polish and Protect – Concentrate – 6-32oz. (0.95 ltr.) Bottle w/pumps  |  $204.00
40810  |  Protectshine Polish and Protect – 32oz. Bottle w/Trigger Sprayer  |  $13.50
40816  |  Protectshine Polish and Protect – 6-32oz. Bottle w/Trigger Sprayer  |  $75.00

Purchase our Single-Pack

Buy on Amazon

Purchase our Multi-Pack

Buy on Amazon


Protecshine Soluble Salt Remove Remover Display-tall

Protecshine – Soluble Salt Remover


Protecshine Soluble Salt Remover is a unique, environmentally-friendly liquid that penetrates the micro pores of the surface to remove embedded dirt, debris, soluble salts and other contaminates.  This eco-friendly product helps to eliminate potential corrosion and effectively extends the life of your paint and/or protective coating.

Directions for Use

  1. Preparation for Application: Remove all grease or oil from the surface prior to application. Rinse the application surface thoroughly. For best results, remove any rust scale or blistered/damaged coating by using a wet or dry abrasive blasting, water jetting, power tool cleaning or hand tool cleaning.
  2. Application: Do NOT apply to a hot surface. Do NOT allow product to dry on surfaces. Spray product uniformily across the application surface, making sure to not miss any areas. Once the application surface is entirely wetted with product, use a power washer to thoroughly rinse the surface with ONLY clean water. If power washing is not available, use a hose with ONLY clean water and rinse thoroughly.
  3. Protection: After the surface is thoroughly cleaned, apply a protective coating to the surface as soon as possible. We recommend the use of Protectshine brand – Polish and Protect. Following your coating manufacturer’s specifications closely to prevent premature coating failure.
    CAUTION: Protecshine’s effectiveness is greatly reduced in cold weather where freezing conditions could cause the product to freeze prior to remove soluble salts. Protecshine’s effectiveness is greatly reduced in hot conditions where direct sunw ill cause the product to evaporate prior to removing soluble salts.
    Before applying, test a small amount in an inconspicuous place to check compatibility with surface.

Availability

42800  |  Protecshine Soluble Salt Remover – Concentrate – 32oz. (0.95 ltr.) Bottle w/pump  |  $21.00
42806  |  Protecshine Soluble Salt Remover – Concentrate – 6-32oz. (0.95 ltr.) Bottle w/pumps  |  $120.00
42810  |  Protecshine Soluble Salt Remover – 32oz. Bottle w/Trigger Sprayer   |  $14.50
42816  |  Protecshine Soluble Salt Remover – 6-32oz. Bottle w/Trigger Sprayer  |  $81.00

 Contact Us for purchasing information.

TALL FIREARMs

Protecshine – Firearm MPL – Maintain | Protect | Lubricate


Protecshine Firearm MPL is the ultimate product to maintain, protect and lubricate your firearm from the inside out.  This non-toxic, biodegradable product is the long-lasting invisible “armor” that eliminates the need for other cleaners, lubricants or protectants. Formulated with corrosion-inhibiting properties, Firearm MPL creates a thin, invisible shield by penetrating the mircropores of the surface to create a non-slick, no-stick surface. Remove and prevent oxidation, carbon and other fouling buildup; improve magazine ejection and round feeding, keep all firearm parts/components lubricated before, during and after use as well as storage.  Firearm MPL is safe for use on all surfaces, revitalizing and protecting even antique firearms.  Firearm MPL is the long-lasting “armor” that stands strong!

Before and After Firearm Use

  1. Spray the firearm and all components thoroughly with Firearm MP.  Soak all brushes and cleaning patches with Firearm MP.
  2. Clean all surfaces until cleaning patches come out clean.
  3. After cleaning, lightly spray the entire firearm/components and allow to air dry for 10-15 minutes. Wipe with a clean cloth that is dampened with Firearm MP.
  4. Your firearm is ready for use and/or storage.  Repeat general cleaning before and after each use.

Safe for use on all surfaces. Do NOT allow product to freeze or apply to a cold surface. Do NOT mix with other chemicals. For sensitive skin, wear protective gloves.

Heavy Cleaning, Preservation and Restoration

  1. Break down the firearm completely.
  2. Fill a container or bucket with enough Firearm MP to completely submerge parts.  Submerge all parts and clean with a brush kit. For heavy build-up, parts may be allowed to soak as needed.
  3. After cleaning, lightly spray the entire firearm/components and allow to air dry for 10-15 minutes. Wipe excess Firearm MP with a clean cloth that is dampened with Firearm MP. Reassemble.

For pistols that don’t break down: Submerge the entire firearm. While submerged, clean the entire pistol with a brush kit. After cleaning, lightly spray the entire firearm/components and allow to air dry for 10-15 minutes. Wipe excess Firearm MP with a clean cloth that is dampened with Firearm MP.

For rifles: Submerge any parts and set base in container or bucket with submerged parts. Spray entire firearm thoroughly, down the barrel and into all components. Clean with a brush kit. After cleaning, lightly spray the entire firearm/components and allow to air dry for 10-15 minutes. Wipe excess Firearm MP with a clean cloth that is dampened with Firearm MP. Reassemble.

For Long Term Storage: Firearm MP may be sprayed on and left on all surfaces without wiping. When removed from storage, lightly spray external surfaces and wipe with a clean clothed that is dampened with Firearm MP for a polished look. Lubricate with Firearm MP as necessary.

Safe for use on all surfaces. Do NOT allow product to freeze or apply to a cold surface. Do NOT mix with other chemicals. For sensitive skin, wear protective gloves.

Availability

45800  |  Protecshine Firearm MPL – Concentrate – 32oz. (0.95 ltr.) Bottle w/pump  |  $180.00
45806  |  Protecshine Firearm MPL – Concentrate – 6-32oz. (0.95 ltr.) Bottles w/pumps  |  $1080.00
45810  |  Protecshine Firearm MPL – 32oz. (0.95 ltr.) Bottle w/Trigger Sprayer  |  $28.00
45816  |  Protecshine Firearm MPL – 6-32oz. (0.95 ltr.) Bottle w/Trigger Sprayer  |  $162.00

Buy on Amazon